Click on the image to check the artwork
F21-10D radio remote controls are mainly used for bridge crane and overhead crane,easy to operate to keep workers safety.
products Application:
MD double speed electric hoist or double speed electric chain hoist with hook,monorails ,double hook /single speed hoist crane,
and used for the industrial remote control which are under 23 connection
Breif Introduction
Transmitter size:239*65* 65mm weight:255g
Receiver size:200*165*107mm weight:1200g
Specification:
control distance: up to 100m
unique code : over 4.3billon unique ID codes .
temperature : -35°C___+80°C
Enclosure protection class : IP65
Transmitter power: DC3v
Receiver powder : AC 380v/ 36v/220V or DC12V/24V
output capacity: full sealed relay output with 5 amperes
Standard configuration:
One transmitter ;
One receiver;
One 1m cable connect with receiver
One operation and maintain manual .
Products Features:
* 10 Dual speed push button
* control points are upto 11
*With the battery voltage alarm device to cut off the circuit when voltage is insufficient.
*with the Rotate key switch to guarantee the safety.
*set the internal functions by computer interface
*up/down ,east/west , south/ north push button can be set mutual inhibition or not .
*power button can be set start,speed up,jump strokes, ordinary etc.
*spare 1-2 ,3-4 key can be set ordinary, interlock,jump strokes,switch etc.
F21-10D Radio Remote Controller