Click on the image to check the artwork
Products Application:
MD double speed electric hoist or double speed electric chain hoist with hook,monorails ,double hook /single speed hoist crane,
and used for the industrial remote control which are under 14 connection
Brief Introduction
Transmitter size:239*65*65mm weight:255g
Receiver size:331*160*140mm weight:1200g
Specification:
Control distance : up to 100m
Unique code : over 4.3billon unique ID codes .
Temperature : -35°C~+80°C
Enclosure protection class : IP65
Transmitter power: DC3v
Receiver powder : AC 380v/ 36v/220V or DC12V/24V
Output capacity: Full sealed relay output with 5 amperes
Standard configuration:
One transmitter ;
One receiver;
One 1m cable connect with receiver
One operation and maintain manual .
Produts Features:
* 12 Dual speed push button+one EMGS button+one START button
* control points are up to 14
*With the battery voltage alarm device to cut off the circuit when voltage is insufficient.
*with the Rotate key switch to guarantee the safety.
*set the internal functions by computer interface
*up/down ,east/west , south/ north push button can be set mutual inhibition or not .
*power button can be set start,speed up,jump strokes, ordinary etc.
*spare 1-2 ,3-4 key can be set ordinary, interlock,jump strokes,switch etc.
F21-12s remote controls